User's Manual
Table Of Contents
- Customer Specification
- HL1916
- 1. SCOPE
- 2. ELECTRICAL PERFORMANCE
- 2.1 Power Supply
- 2.2 Power Management
- 2.3 Signal Interface
- 2.3.1 Signal Specifications
- 2.3.2 D-SUB Connector and Pin Assignment (Figure1)
- 2.3.3 Digital Visual Interface and Pin Assignment (DVI)
- 2.3.4 Control Interface
- 2.4 Product Features
- 2.5 Screen Performance
- 2.5.1 Standard Testing Conditions
- 2.5.2 Brightness
- 2.5.3 View angle
- 2.5.4 Brightness Uniformity
- 2.5.5 Contrast radio
- 2.5.6 White Color Coordinates
- 2.5.7 Response Time
- 2.5.8 Color Gray
- 2.5.9 Gamma Curve
- 3. OPERATING GUIDE
- 4. MECHANICAL SPECIFICATIONS
- 5. ENVIRONMENT CONDITONS
- 6. DEFECT, SCRATCH and DUST
- 7. NOTICE FOR HANDING
- Appendix 1 Preset Timings
Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 5 of 32
2. ELECTRICAL PERFORMANCE
2.1 Power Supply
-Input Voltage
: AC100-240 ± 10%
- Current (max) : 0.25A(AC220-240V); 0.55A(AC100-120V)
- Frequency
: 50/60Hz ± 3Hz
- Power Consumption : <54W
2.2 Power Management
Power Management condition and status for ANALOG Input mode
SIGNALS Power
State
Horizontal Vertical Video Consumption
LED
Status
ON ON ON Active <54W Green
OFF ON Blanked Orange
ON OFF Blanked Orange
Active off
OFF OFF Blanked
<2W
Orange
Power Management condition and status for DIGITAL Input mode
SIGNALS Power
State
DE Horizontal Vertical Video Consumption
LED
Status
ON Pulses ON ON Active <54W Green
Active off NO
Pulses
N/A N/A Blanked <2W Orange
2.3 Signal Interface
ONOFF
GND
DVI-D
15-PIN MIN D-TYPE VGA
FEMALE CONNECTOR
9-PIN D-SUB RS-232
FEMALE CONNECTOR
5V SWITCH
IN LET 3P IEC TYPE