User's Manual

Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 17 of 32
Auto
brightness
/contrast
On/Off
Automatically get input signal match with the
monitor
Auto
position
/phase
/frequency
On/Off
Automatically adjusts the image position,
H-Size (or V-Size) and Fine settings. Improve
focus clarity and image stability.
Execute
selected
auto
function
The selected auto functions are executed.
Note: The quality of the function depends on
the applied picture contents. To get better
effect it is recommended to apply full screen
and including whiteness contents picture.
Language
English
Chinese
Select the language of OSD menu.
Note: English menu is default state.
You can make further settings for the
picture source
Frequency
/Phase
Adjust the frequency and phase of the input
signal.
Sharpness
Interpolation filter
1 to 7
One of the 7 filters can be selected for the
focus setting to reduce scaling artifacts.
Interpolation filters depend on the input
resolution. A filter is not usually used with
1280X1024 since each pixel is controlled
by its own pulse. The user should
individually adjust the filter depending on
the application.
OSD setting
H position
V position
Adjustment of OSD horizontal position
Adjustment of OSD vertical position
(Default state is on the bottom right corner
of the screen)
DPMS on
The backlight is switched off while it is no
input signal. (The default state is DPMS
on)
DPMS
setting
DPMS off
The backlight will not switch off if it is no input
signal. Only switches off along with the power
switches off.
Others
Status
Current display settings can be called here
in the respective picture mode.
Working hours of display, firmware type
and version, OSD version, configuration
version, current source, current timing of
input signal, current LUT
Service level 2 Settings in this menu must only be carried out by service person*
Quit OSD
menu
Accept changes
Reject changes
Quick OSD menu and either save or reject
the changes.
If you have reached this menu
unintentionall
y
,
y
ou can return to the main