User's Manual

Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 16 of 32
Main Menu Function
Adjustment
range
Description
Brightness 0…100%
It is used to adjust the black level of the
monitor.
This allows the darker area to be seen more
distinctly.
Note: for DVI-D signals the brightness
setting is optimized. Manual changes are
not recommended.
Contrast 0…100%
Adjustment of contrast
This allows the brighter area to be seen
more distinctly.
Note: for DVI-D signals the Contrast
setting is optimized. Manual changes are
not recommended.
Backlight
0…100%
Recommended
setting Max. 80%
Adjustment brightness of LCD backlight to
adapt total brightness for room illumination
Color
1,2,3 User
1, 9300K
2, 7300K
3, 6500K
User define
Set desired color or Hue
Three fixed color temperatures and one
adjustable color temperature are available
The color locations 1 to 3 can not be saved
Brightness
/Contrast
Set user
color
Red Gain
Green Gain
Blue Gain
-32…+32
Define user color temperature
Select Red, Green, Blue gain separately
H Position 0…100% Shift picture in horizontal direction
Position
V Position 0…100% Shift picture in vertical direction
Picture Source
VGA (DVI-A)
DVI-D
Select source for main display
When you enter this OSD menu the current
source is highlighted.
Following switch off and on of the display,
the picture sources are searched one after
another.
Auto function
(Analog input
only)
The auto functions are used to assist the
automatic setting of parameters. The quality
of settings depends on the picture contents
and the type of synchronization.
Corresponding items in the OSD can adjust all
settings finely.