User's Manual
Table Of Contents
- Customer Specification
- HL1916
- 1. SCOPE
- 2. ELECTRICAL PERFORMANCE
- 2.1 Power Supply
- 2.2 Power Management
- 2.3 Signal Interface
- 2.3.1 Signal Specifications
- 2.3.2 D-SUB Connector and Pin Assignment (Figure1)
- 2.3.3 Digital Visual Interface and Pin Assignment (DVI)
- 2.3.4 Control Interface
- 2.4 Product Features
- 2.5 Screen Performance
- 2.5.1 Standard Testing Conditions
- 2.5.2 Brightness
- 2.5.3 View angle
- 2.5.4 Brightness Uniformity
- 2.5.5 Contrast radio
- 2.5.6 White Color Coordinates
- 2.5.7 Response Time
- 2.5.8 Color Gray
- 2.5.9 Gamma Curve
- 3. OPERATING GUIDE
- 4. MECHANICAL SPECIFICATIONS
- 5. ENVIRONMENT CONDITONS
- 6. DEFECT, SCRATCH and DUST
- 7. NOTICE FOR HANDING
- Appendix 1 Preset Timings
Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 15 of 32
3.2 Key Functions without active OSD Menu
Key Action
Menu Activate OSD
Up Select VGA (DVI-A) input source
Down Select DVI-D input source
Note: This choice is in case all the signal sources are available. If not, the signal on the any one
input will be displayed.
3.3 Key Functions in the OSD Menu
Keys Situation Action
Menu Always Jump to next line
Slide controller Increase Value Up
Command “Enter Key”
Down Slide controller Decrease value
Except “Exit OSD” Menu One menu level upwards
(Settings are retained)
Set
In “Exit OSD” Menu Return to main menu
(Settings are retained)
3.4 Submenu Calls
Press the “Menu” key while the OSD is active, the function icon will jump to next line.
Pressing the “Up” key, the coordinate submenu will be selected.
3.5 Locking of OSD Menu
Keys Action
1 time Set key
3 times Up key
within 3 seconds
Lock or unlock OSD
If the OSD is locked, it is only possible to
select input source (see 3.1 section).
3.6 Description of OSD Menu