User's Manual
Table Of Contents
- Customer Specification
- HL1916
- 1. SCOPE
- 2. ELECTRICAL PERFORMANCE
- 2.1 Power Supply
- 2.2 Power Management
- 2.3 Signal Interface
- 2.3.1 Signal Specifications
- 2.3.2 D-SUB Connector and Pin Assignment (Figure1)
- 2.3.3 Digital Visual Interface and Pin Assignment (DVI)
- 2.3.4 Control Interface
- 2.4 Product Features
- 2.5 Screen Performance
- 2.5.1 Standard Testing Conditions
- 2.5.2 Brightness
- 2.5.3 View angle
- 2.5.4 Brightness Uniformity
- 2.5.5 Contrast radio
- 2.5.6 White Color Coordinates
- 2.5.7 Response Time
- 2.5.8 Color Gray
- 2.5.9 Gamma Curve
- 3. OPERATING GUIDE
- 4. MECHANICAL SPECIFICATIONS
- 5. ENVIRONMENT CONDITONS
- 6. DEFECT, SCRATCH and DUST
- 7. NOTICE FOR HANDING
- Appendix 1 Preset Timings
Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 10 of 32
Plug and Play VESA DDC2B
Temperature 5-40 degree C Environment
Condition
Humidity 30-80% (without condensation)
Input Voltage AC100-240V, 50 / 60Hz; <0.5A
Normal
operation
<54W
Power
Consumption
Power
saving
<2W
Power
Supply
Input Connector 3P IEC Type
VESA compatible arm mounting interface
100mm x 100mm
Height up/down 60mm—80mm (around)
Tilt adjust Up & Down –5--15 degree
AC Power cord (Extension
Type)
3.0 m
Signal Cable 3.0 m: D-sub15pin VGA; 3.0 m: DVI-D
Accessories
Others User’s manual, DVI-I to VGA connector
Remark: The monitor shall recognize preset modes within a range of ±1KHz for horizontal and
±1Hz for vertical. (See appendix 1)
2.5 Screen Performance
2.5.1 Standard Testing Conditions
- Warm up time
≥ 20
minutes.
- AC supply voltage 100-240VAC, 50/60Hz
- Ambient temperature
20°C -25°C
- Relative Humidity 30% --80%
- Video signal 1280 x 1024 @ 60Hz; DVI-D
- Ambient Environment Dark
- Setting Set to Gamma CIE factory preset
- Luminance meter Minolta CA-210