User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 8 of 33
Mounting screws
Number 4
Thread M4
Strength 12
Immersion depth
Min. 10 mm; Max. 12
mm
Torque Max. 3 Nm
Please see 4.1.4 for details.
The permissible ambient temperature range (5 °C ... 35 °C) must not be violated.
Do not subject device to unnecessary shocks. Take care when transporting!
Use the original p ackaging! The panel in particular should be protected
against shocks.
When touching the panel surface, the mechanical contact or an electrical
discharge may cause a brief disturbance in the picture quality.
Care of unit / cleaning agents
− The front panel is extremely sensitive to mechanical damage. Avoid all
scratches, knocks etc.!
− Remove water drops immediately; extended contact with water discolors the
surface.
Clean the front panel when dirty， using a micro fiber cloth and, if necessary, a
glass cleaning agent. Only clean housing parts using a cleaning agent for
plastics.
 Note:
Do not use cleaning agents containing solvent, e.g. petroleum spirit!
Explanation of the symbols
Attention: Consult the accompanying documents
Alternation current (AC)
Protective earth