User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 23 of 33
PhaseG
(Analog only)
G ADC clock
phase
0…7
PhaseB
(Analog only)
B ADC clock
phase
0…7
Sharpness Interpolation
filter -5 to 5
One of the 11 filters can be
selected for the sharpness
setting to reduce scaling
artifacts. Interpolation
filters depend on the
input resolution. Digital
signals which is used with
1280X1024 resolution can
not be adjusted since each
pixel is controlled by its
own pulse. Other digital
signals which is lower than
1280 x 1024 can be
adjusted. Analog signals
can be adjusted in all
supported resolution.
Negative figure is adjusted
to get softer image and
positive figure is adjusted
to get sharper image.
The user should
individually adjust the
filter depending on
the application.
Input
Source
DVI-D
DP
VGA
BNC
Select the active input
source priority.
If you call this OSD menu,
the current source is
displayed. If current source
is inactive (NO sync) and,
it will auto search other
port.
Auto-Color ON / OFF Automatically get input
signal match with the
monitor
Auto Adjust
(Analog only)
Auto-Configure ON / OFF Automatically adjust the
image display settings.