User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 22 of 33
6.4 Description of the menus
Main Menu Function Adjustment
range
Description
Brightness 0…100 Set brightness.
Adapting the image quality
of darker picture areas.
The center point is in 50
position.
Note:
The brightness settings are
already optimized for
digital signals. Manual
changes to these values
are not recommended, as
this can result in an
impairment of picture
quality (loss of grayscales).
Contrast 0…100 Adjustment of contrast.
This allows the brighter
area to be seen more
distinctly. The center point
is in 50 position.
Note: for DVI-D signals
the Contrast setting is
optimized.
Manual changes are not
recommended.
Backlight 0…255 It is used to adjust the
Brightness of the monitor.
Performance
Color Color1
Color2
Color3
User
R G B Gain
R G B Bias
Color 1, Color 2, Color 3
are three fixed color
temperature and can not
be changed. User
temperature can be
adjustable and saved.
H Position
(Analog only)
0…255 Shift picture in horizontal
direction
V Position
(Analog only)
0…255 Shift picture in vertical
direction
Frequency
(Analog only)
0…100 Adjust the frequency and
phase of the input signal.
Hsync Phase
(Analog only)
0…63 Source clock phase
Display
Settings
PhaseR
(Analog only)
R ADC clock
phase
0…7
For compensate R,G,B
phase for analog long
cable use.