User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 21 of 33
The ‘Down’ key function is used to select input source and is enabled only when
OSD menu is locked. This function can be enabled or disabled through OSD
selection. This choice is in case all the signal sources are available. If not, the
monitor will auto search DVI-D, DP and VGA (or BNC depended on which one is
defined).
6.3.3Key functions in the OSD menu
Key(s) Situation Action
Menu Always Jump to next line
Up Slide controller Increase value
Command "Enter key"
Down Slide controller Decrease value
Except "Exit OSD"
menu
One menu level upwards (settings
are retained)
Set
In "Exit OSD" menu Return to main menu (settings are
retained)
6.3.4 Submenu calls
Press the “Menu” key while the OSD is active, the function icon will jump to next
line. Pressing the “Up” key, the coordinate submenu will be selected.
6.3.5 Locking of OSD menu
Keys Action
1x the Set key
3x the Up key
Lock or unlock OSD If the OSD is locked, it is only
possible to switch over the source (see Section 6.3.2).
6.3.6 Keys function hints
A “dynamic help for keypad function” is available for each menu: it explains the
role of each key depending on the OSD menu window, which is currently active.