User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 14 of 33
Put the stand base inside the monitor.
Fasten the stand base with four M4x12 screws.
4.1.4 Mounting Use
Remove the stand base and put on the cover according
to the contrary way in 4.1.3. Remove the four screws
at the VESA holes, and then fixed the mount by mounting
screws (see page 6 table Mounting Screws for details).
4.2 Switching on the display
Switch on the flat panel display using the power switch. The operation LED
lights up (color: green, provided the timing has been recognized – please refer