User Manual

Last change:
17
th
Jun, 2013
User Manual DSC1913-D/DC
Page 13 of 33
DVI-A connector: the flat panel display can be connected to the computer
system using a VGA-DVI-A Cable on the analog channel of a DVI connection for
analog signal. The display is adapted using an OSD menu.
BNC connector: the flat panel display can be connected to the video camera
using a BNC-DVI-A Cable for analog signal. The display is adapted using an
OSD menu.
DVI-D connection: The connection to the computer can also be made via the
digital single link. The picture quality, noise immunity and radiated interference
of the complete system depend on the cable quality and length.
DP connection: The connection to the computer can also be made via the
DisplayPort connection. The picture quality, noise immunity and radiated
interference of the complete system depend on the cable quality and length.
Serial connection: you can connect the display via the RJ11 connector to the
computer for firmware updating.
4.1.3 Stand base (attaching)
Remove the little cover first for table use.