User's Manual

19" LCD MONITOR
REV A
15
5.4 Analog and digital inputs (DVI-I,DP)
DVI-I connector
Connect VGA-DVI-A cable with DVI-I connector (male) for the analog input
to the DVI- connector (female). Or connect DVI-D cable for digital signal.
DP socket
With DP digital signal through DP cable.
5.5 Power supply connection
Note
Device fuses can not be exchanged outside of the repair centers.
The display power supply is connected using an appliance plug. Only use the
power cable supplied in the delivery, or a cable with PE conductor and
appliance socket to DIN 49 547, IEC 320.
Caution
A power cable with PE conductor must be used which corresponds to the
safety requirements of the respective country of use.
5.6 Serial interface
Caution
No other units may be connected to the service socket. Connection or
disconnection of a unit may only be carried out by servicing personnel or
those trained by them. A Serial Spot Meter or Universal Serial Luminance
Meter must not be connected in the presence of patients.
The display has a serial RS 232 RJ11 interface sockets to update the SW.
5.7 DC-5V power supply
Caution
This port is only use for DVI long cable support.The maximum current is
1A.Connection or disconnection of a unit may only be carried out by servicing
personnel or those trained by them.