User's Manual

Last change:
2015-1-23
Copyright @Bigtide
All rights reserved
HL1936(HL1936SMT-L
/R internal) For GE
Page 8 of 37
Only support DVI single link ，pin 4,5,12,13,20,21 do not work.
Pin - Assignment of 25-pin DVI-D Female Connector
Pin 1 - TMDS Data 2- Pin 12 - TMDS Data 3- Pin 22 - TMDS Clock Shield
Pin 2 - TMDS Data 2+ Pin 13 - TMDS Data 3+ Pin 23 - TMDS Clock+
Pin 3 - TMDS Data 2/4 Shield Pin 14 - +5 V Power Pin 24 - TMDS Clock-
Pin 4 - TMDS Data 4- Pin 15 – Ground
Pin 5 - TMDS Data 4+ Pin 16 - Hot Plug Detect
Pin 6 - DDC Clock Pin 17 - TMDS Data 0-
Pin 7 - DDC Data Pin 18 - TMDS Data 0+
Pin 8 - Analog Vertical Sync Pin 19 - TMDS Data 0/5 Shield
Pin 9 - TMDS Data 1- Pin 20 - TMDS Data 5-
Pin 10 - TMDS Data 1+ Pin 21 - TMDS Data 5+
Pin 11 - TMDS Data 1/3 Shield
2.3.4 Control Interface
Figure 3
6-pin RJ11 Connector
Pin Signal Pin Signal
1 NC 4 Transmitted Data
2 Received Data 5 NC
3 GND 6 NC
Software update of the display and automatic calibration with external luminance spot meter will be
through this port.
2.3.5 USB Interface (HL1936SMT-R)
The monitor supports touch function ,the touch screen can be used in the Windows and the Linux.