User's Manual

Last change:
2015-1-23
Copyright @Bigtide
All rights reserved
HL1936(HL1936SMT-L
/R internal) For GE
Page 25 of 37
Shock
According to EN 60068-2-27 (single shock)
250m/s2, 6ms(in storage packing)
According to EN 60068-2-29 (permanent shock)
5.4 Drop Test (packed)
Figure 6
5.5 Safety specifications
Safety standards
IEC 60601-1:2005, ANSI/AAMI
ES60601-1:2005 ＆ CSA C22.2
No.60601-1:2008,EN60601-1，EN60601-1-2，
GB4943.1-2011 ， GB9254-2008 ，
GB17625.1-2012，FCC Part15
Approvals
cTUVus, CCC, CB ,FCC
Position Height
Corner
1 76.0cm
Edge
3,2,4 76.0cm
A,B,C,D 76.0cm
E 76.0cm
Surfaces
F 76.0cm
(Cushion should be changed to new one.)
Corner
5 76.0cm
Edge
6,7 76.0cm