User's Manual

Last change:
2015-1-23
Copyright @Bigtide
All rights reserved
HL1936(HL1936SMT-L
/R internal) For GE
Page 20 of 37
Exit Reject changes
Accept changes
Quit OSD
Check reject changes or accept
changes when quit OSD menu.
* Service level 2 enter: while the highlight line is on the service level 2 position, press 1 x Up, and 2
x Down keys, it will enter the following submenu.
Service
level2
LUT select and factory settings recall: Contrast; Brightness; Backlight; Setting1;
OSD position; corresponding LUT factory recall. (The default state is
Gamma2.2LUT)
CIE Select Gamma CIE LUT
DICOM Select DICOM LUT
Gamma 1.8 Select Gamma 1.8 LUT
Gamma 2.0 Select Gamma 2.0LUT
Gamma 2.2 Select Gamma 2.2 LUT(default)
3.7 Factory Default Setting
Main Menu Function Default Value
Brightness 128
Contrast 128
Performance
Color Setting1
Display
Settings
Sharpness 2
Auto-Color ON Auto Adjust
(Analog only)
Auto-Configure ON
Horizontal position 255
Vertical position 255
Background 2
LED ON
OSD Settings
Language English
Service level 2:
LUT Settings Gamma 2.2
ALC OFF
Hotkey: ON
Advanced Functions
DICOM Backlight: OFF
Backlight EOL: OFF
Service Level2
Power saving: OFF
Others:
OSD Menu status: locked