User's Manual

Last change:
2015-1-23
Copyright @Bigtide
All rights reserved
HL1936(HL1936SMT-L
/R internal) For GE
Page 17 of 37
Except “Exit OSD” Menu One menu level upwards
(Settings are retained)
EXIT
In “Exit OSD” Menu Return to main menu
(Settings are retained)
3.4 Submenu Calls
Press the “Menu” key while the OSD is active, the function icon will jump to next line.
Pressing the “Up” key, the coordinate submenu will be selected.
3.5 Locking of OSD Menu
Keys Action
1 time EXIT key
3 times Up key
within 3 seconds
Lock or unlock OSD
If the OSD is locked, it is only possible to
select input source (see 3.1 section).
3.6 Description of OSD Menu
Main Menu Function Adjustment range Description
Brightness 0…255 Set brightness.
Adapting the image quality of
darker picture areas. The center
point is in 128 position.
Note:
The brightness settings are
already optimized for digital
signals. Manual changes to these
values are not recommended, as
this can result in an impairment of
picture quality (loss of
grayscales).
Contrast 0…255 Adjustment of contrast.
This allows the brighter area to
be seen more distinctly. The
center point is in 128 position.
Note: for DVI-D signal
the
Contrast setting is optimized.
Manual changes are not
recommended.
Performance
Backlight 0…255 It is used to adjust the Brightness