User's Manual

Last change:
2015-1-23
Copyright @Bigtide
All rights reserved
HL1936(HL1936SMT-L
/R internal) For GE
Page 10 of 37
Horizontal
frequency
31Hz –82kHz 31kHz -82kHz
Vertical frequency
50.0Hz - 85Hz
(Non-Interlaced)
50.0Hz -85 Hz
(Non-Interlaced)
Video Signal Analog RGB Digital RGB
Sync. Signal
Separate Sync.
(TTL) Composite
Sync. Sync
on green
TMDS
Pixel Clock
25.0MHz
-165.0MHz
25.0MHz
-165.0MHz
Input Signals
Input connector Mini D-sub 15Pin DVI-D
Control key Menu, up, down, exit
Functions OSD
Backlight, Contrast, Brightness level,
Position, Size, Phase, Gamma,
DICOM etc.
Safety IEC60601-1, CCC
EMC IEC60601-1-2
Power
Management
VESA DPMS, EPA,
Plug and Play VESA DDC2B
Regulations
Temperature 10-40 ℃
Humidity 10% -80% (non-condensing)
Environment Condition
Input Voltage DC24V; <2A
Power
Consumption
Normal operation
<50W
Power saving <5W
Power Supply
Input Connector 3W3 FEMALE R/A Type
VESA compatible arm mounting interface
100mm x 100mm
 Remark: The monitor shall recognize preset modes within a range of ±1KHz for horizontal and
±1Hz for vertical. (See appendix 1)