User Manual

19" LCD MONITOR
REV A2
23
Quit OSD menu
Accept
changes
Reject
changes
Quick OSD menu and either save or reject
the changes.
If you have reached this menu
unintentionally, you can return to the main
menu using the EXIT key.
OSD is locked
If this message is displayed, you do not
have the authority to carry out the changes
in the OSD menu.
Please contact your servicing partner in this
case.
* Service level 2 enter: while the highlight line is on the service level 2 position, press 1 x
Up, and 2 x Down keys, it will enter the following submenu.
Service
level2
LUT select and factory settings recall: Contrast; Brightness;
Backlight; Setting1; OSD position; corresponding LUT
factory recall. (The default state is Gamma2.2LUT)
CIE Select CIE LUT
DICOM Select DICOM LUT
Gamma 1.8 Select Gamma 1.8 LUT
Gamma 2.0 Select Gamma 2.0LUT
Gamma 2.2
Select Gamma 2.2
LUT(default)
Native
Select panel native
characteristics
FACTORY
RESET
Load the factory setting
7. Fault diagnostics