User Manual

19" LCD MONITOR
REV A2
21
Frequency
(VGA
only)
Adjust the frequency and phase of the input
signal.
Phase
(VGA
only)
Adjust phase of the input signal.
Picture
Source
DVI-IN
VGA-IN(A
nalog)
Select source for main display
When you enter this OSD menu the current
source is highlighted.
Following switch off and on of the display,
the picture sources are searched one after
another.
The auto functions are used to assist the
automatic setting of parameters. The quality
of settings depends on the picture contents
and the type of synchronization.
Corresponding items in the OSD can adjust
all settings finely.
Auto-
Balance
On/Off
Automatically get input signal match with
the monitor
Auto
-Config
On/Off
Automatically adjusts the image position,
H-Size (or V-Size)
Execute
The selected auto functions are executed.
Note: The quality of the function depends
on the applied picture contents. To get
better effect it is recommended to apply full
screen and including whiteness contents
picture.
Auto
function
(Analog
input
only)
Auto adjust
on mode
change
On/Off
Enable or disable auto-adjust on mode
change
Language
English
Chinese
Select the language of OSD menu.
Note: English menu is default state.