Customer Specification 17.3 Inch Color LCD Display Model: Name HL1706LT Department/Title Date Signature Change History Version Date Author Modification A0 2015-8-17 Xu Hongjie Preliminary Last change: 2015-8-17 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
CONTENTS 1. SCOPE.................................................................................................................................................. 4 2. ELECTRICAL PERFORMANCE ...................................................................................................... 5 2.1 Power Supply ................................................................................................................................................5 2.2 Power Management ...............................
7. MTBF & Warranty............................................................................................................................. 16 8. DEFECT, SCRATCH and DUST ...................................................................................................... 16 8.1 Inspection instruments ...............................................................................................................................16 8.2 Environment condition.................................................
1. SCOPE This document defines the performance requirements for a 17.3-inch FHD TFT LCD color monitor with touch screen for medical use. This product is controlled by model name; any change will be recorded in the list and confirmed by customer. This high-resolution color display is specifically designed to meet the rigorous performance standards needed for medical monitoring system. The surface of the monitor has an anti-glare coating to minimize reflection and a hard coating to reduce scratch.
2. ELECTRICAL PERFORMANCE 2.1 Power Supply -Input Voltage : DC24V ± 10% - Current (max) : 1.25A - Power Consumption : <30W 2.
Digital (DVI-D/DP) EDID 00 FF FF FF FF FF FF 00 0A 84 16 19 01 00 00 00 32 13 01 03 81 26 1E 78 2E AE A5 A6 54 4C 99 26 14 50 54 BF EF 80 81 80 01 01 01 01 01 01 01 01 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70 13 00 78 2C 11 00 00 1E 00 00 00 FD 00 38 4B 1E 51 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 48 4C 31 39 31 36 56 0A 20 20 20 20 20 00 00 00 10 00 00 3D 40 00 C0 03 00 78 2C 11 00 00 1E 00 F6 Week, year Serial number Note: the datum above for reference only.
DP connector Pin Number 1 2 3 4 5 6 7 8 9 10 20-pin Side of the Connected Signal Cable Pin Number ML0(p) GND ML0(n) ML1(p) GND ML1(n) ML2(p) GND ML2(n) ML3(p) 11 12 13 14 15 16 17 18 19 20 20-pin Side of the Connected Signal Cable GND ML3(n) GND GND AUX(p) GND AUX(n) HPD Re-PWR PWR 2.3.4 USB 2.0 Interface The monitor supports touch function, the touch screen only can be used in the Microsoft® Windows 7.
2.4 Panel Features Panel Module G173HW01.0 Size 17.3” Aspect Ratio 16:9 (W:H) Active Display Area 381.888 (H) x 214.812 (V) mm Resolution 1920 (H)x 1080 (V) pixels Pixel Pitch 0.1989(H) x 0.1989(V) mm Color Depth 16.7M Lamp Type LED (Replaceable module) Surface Hard-coating(3H),Glare treatment 2.5 Display Performance 2.5.1 Standard Testing Conditions - Warm up time ＞30 minutes.
2.5.5 Contrast ratio 600:1 500:1 (Typ.) (Note 3) (Min.) 2.5.6 White Color Coordinates x=0.30±0.01 y=0.31±0.01 2.5.7 Response Time Typ. (Tr+Td): 37+3ms (Note 6) Max. (Tr+Td): 50+10ms (Note 6) 2.5.8 Color Gray 64 gray levels should be displayable Note1: Test Equipment Setup The measurement should be executed in a stable, windless and dark room between 20 minutes after the backlight at the given temperature for stabilization of the backlight. This should be measured in the center of screen.
Note 3: Definition of contrast Ratio (CR): Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel. Gmax: Luminance with all pixels white Gmin: Luminance with all pixels black Note 4: Definition of Luminance of White: Luminance of white at center point. Note 5: Definition of luminance uniformity The luminance uniformity is calculated by using following formula.
Note 6: Definition of response time is as follows: Last change: 2014-5-16 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
2.6 Touch screen Performance 2.6.1 Features Item Specification Type P-CAP Input Mode Finger Cable FPC USB-B 2.0 interface (Voltage & connection provide by host system ) Interface Type 2.6.2 General Specification Item Specification Frame Size 414mm X247 mm Tolerance -0.3,+0.3mm Active Area 382 X215mm Black Silkscreen 16mm perimeter outside viewable area Surface Treatment Chemically hardened glass, no anti-reflective treatment Total Thickness 2.3±0.20 mm 2.6.
3.1 Keys assignment Menu Up Down Set 3.2 Key Functions in the OSD Menu Keys Menu Up Down Set Last change: 2014-5-16 Action Switch signal input Adjust Backlight Adjust Brightness Adjust Contrast Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
4. MECHANICAL SPECIFICATIONS 4.1 Outline Dimensions & Weight 4.2 Packaging Last change: 2014-5-16 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
Carton Box Dimension Width (mm) TBD Depth (mm) TBD Height (mm) TBD Gross weight TBD 4.3 Label The manufacture serial number consists of 14 characters (majuscule and numbers), format as below: 10287 13 3 1 10 001 Serial number Top Version PN （Pilot Number） Month （1,2,3,4,5,6,7,8,9,A,B,C） Year The last figure of production number. Notes: Month using hexadecimal, A, B, C substitute for October, November, December. Example: HL1706LT products machine Part Number 301010312, TOP version 1.
5.3 Mechanical Load Operation According to EN60068-2-6 10--58 Hz within ± 0.075 mm deflection 58—500 Hz at 10 m/s2 Vibration According to EN 60068-2-27 (single shock) Shock 150m/s2, 6ms No permanent shock allowed in operating conditions Packed unit According to 2M2 EN60721-3-2 6.REGULATION 6.1 Safety Specifications Safety standards EN60601-1, EN60601-1-2, ANSI/AAMI ES6060-1: 2005 + A2(R2012) + A1＆CAN/CSA-C22.2 NO. 60601-1:14, FCC PART15B Approvals cTUVus、CB (NCB Lab.
8.1.3Luminance colorimeter: Topcon BM-7 or equivalent model 8.2 Environment condition 8.2.1 Room temperature: 20 ~ 25 C. 8.2.2 Humidity: 65±5% RH. 8.2.3 Illumination: Fluorescent light (Day-Light Type) display surface illumination to be 300 ~ 700 lux. (standard 500lux.) 8.2.4To be a distance about 35 ± 5 cm in front of LCD unit, viewing line should be perpendicular to the surface of the module judge the visual appearance with human’s eyes. 8.2.
Last change: 2014-5-16 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
8.3 Inspection Specification Last change: 2014-5-16 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
Last change: 2014-5-16 Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
Appendix: Preset Timings Last change: 2014-5-16 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 1024 60Hz 1366 x 768 60Hz 1440 x 900 60Hz 1920 x 1080 60Hz Copyright @ Shenyang Torch-Bigtide Digital Tech.,Co.
