User's Manual

Table Of Contents

CUSTOMIZING TV SETTINGS

Initial Setup

• Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter

Standby Mode and the red LED indicator will illuminate.

• In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn

blue.

• ThersttimeyouturntheTVon,itwillgointotheSetupWizard.Press buttons to select your desired mode and press OK to

conrm.

OK :

Scanning Channel Program

RF CH : 2

Found : 0

EXIT :

Quit

OK :

Home Mode optimizes the standard mode

video settings.

Use the Up and Down arrows on your remote control

or TV keypad to select power on mode.

OK :

Hawaii

Alaska

Apps Media Setup

Source

HDMI1

HDMI2

Component

Home Mode : The picture mode will be Standard if you

select this mode.

Retail Mode : Select Dynamic Mode if you would like your

picture to be brighter. At times this mode may use more

energy to operate the Volume/Sound Mode and Picture

Mode.

• The SLEEP-MODE Power should be less than 0.5 W.

• If channels can not be found, this frame will be

displayed automatically.