User Manual

Table Of Contents

Initial Setup

• Connect the power cord to the power socket after you have completed all the

physical connections. At this stage, the TV will enter Standby Mode and the red

LED indicator will illuminate.

• In Standby Mode, press the

button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn blue.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press OKtoconrm.

OK :Next

HomeMode(EnergySaving)is the default as-shipped television configuration

and settings. And HomeMode(EnergySaving) is the setting in which the product

qualifies for ENERGYSTAR

. Any changes to default as-shipped television

configuration and settings would change the energy consumption. And enabling

certain optional features and functionalities may increase energy consumption

beyond the limits required for ENERGYSTAR

qualication, as applicable. 

RetailMode:Select Retail Mode if you would like your picture to be brighter. At

times this mode may use more energy to operate the Volume/Sound Mode and the

Picture Mode. In this setting, the power consumption may possibly exceed the limited

requirement of the ENERGYSTAR

qualication.

ENERGYSTAR

is a set of power-saving guidelines issued by the U.S.

Environmental Protection Agency(EPA).

ENERGYSTAR

is a joint program of the U.S. Environmental Protection Agency

and the U.S. Department of Energy helping us all save money and protect the

environment through energy efcient products and pratices.

• TheON-MODEPowerunderHomeModeshouldbelessthan

103.5W

• TheSLEEP-MODEPowershouldbelessthan0.5W.

CUSTOMIZING TV SETTINGS

Network Status:Unconnected