TABLE OF CONTENTS 1 Important Safety Instructions 2 2 Safety Information 3 3 4 Preparation What's Included 4 Front View 5 Rear View 6 Installing the Stand Removing the Stand for Wall-Mounting Remote Control 7 7 8 Connecting External Devices 9 10 Initial Setup Navigating the Setup Settings APPS Media Viewing JPEG Viewing MJPEG Source Setup Settings Audio Picture Channel Time Lock Network 11 5 Customizing TV Settings 6 Parental Control 12 13 13 14 14 15 15 16 17 18 18 19 20 22 7 Tro
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included TV Set Remote Control with Batteries 845-051-03B52 TV Stand Four Screws 123-700-DX55 108-620-4031 Quick Connect Guide Warranty Card User Manual Quick Connect Guide Warranty Card 002-B47-WEST 002-L68-WEST 002-I62-WEST User Manual En 4
PREPARATION Front View 1. POWER Switch the TV between On / Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the main menu. 4. CH / Press to select a channel. 5. VOL -/+ Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR ,QIUDUHG 5HFHLYHU Receive IR signals from the remote control.
PREPARATION Rear View 400 190.0625 12.5000 1. Power Cord Connect to AC power outlet. 2. Headphone Socket Connect to the Headphones. 3. USB Port Connect to a USB storage device to play FRPSDWLEOH PRYLH DQG SKRWR ¿OHV 4. LAN Network connection port. 5. HDMI Input &RQQHFW WR D +LJK 'H¿QLWLRQ +' VLJQDO input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7. PC AUDIO Input Connect to a computer audio output. En 6 8.
PREPARATION Installing the Stand • 1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2. Fix the Left Base Stand to the main unit using 3 pcs provided screws. • 3. Fix the Right Base Stand to the main unit using 3 pcs provided screws. Removing the Stand for Wall-Mounting • 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. • 2.Untighten the 6 pcs screws holding the stand assembly and remove them. • 3.
PREPARATION Remote Control 1. HOME: Display the Home menu. 2. POWER:Turn the LED TV on or off. 3. APPS:Press to select the desired APPS. 4. :Display the main TV menu. 5. :Return to previous menu button. 6. :Allows you to navigate the OSD menus and adjust the system settings to your preference. 7. OK:Confirm the selection in WKH 26' RQ VFUHHQ GLVSOD\ 8. INFO: Displays the current input source and the channel information. 9. E X I T: E x i t t h e m a i n T V menu. 10.
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable OR Digital Audio System Composite/Component Cable QRW LQFOXGHG COMPONENT Satellite Receiver VCR Optical Cable QRW LQFOXGHG HDMI 3 AUDIO Audio Cable QRW LQFOXGHG OPTICAL 5) &DEOH QRW LQFOXGHG LAN HDMI 2 HDMI 1 VGA PC AUDIO VGACable (not included Cable QRW LQFOXGHG 3.
CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on, it will go into the Setup Wizard.
CUSTOMIZING TV SETTINGS 6 7 8 • If channels can not be found, this frame will be displayed automatically. Navigating the Setup Settings • Press the MENU button to display the main menu. • Use buttons to select setup menu and then press OK buttons to enter, then press to navigate and select the available menu.
CUSTOMIZING TV SETTINGS APPS • Press the MENU button on the main unit or on the remote control to display the to select the apps and press OK button to enter. Use main menu. Then use to select the desired app. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toongoggles Pandora AccuWeather En 12 Enjoys TV shows & movies streamed instantly over the Internet.
CUSTOMIZING TV SETTINGS MEDIA NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control to display the main menu. Then use to select the media and press OK button to enter. to select the desired option. Use Viewing JPEG • After entering MEDIA, press buttons to select JPEG and then select the / buttons to navigate in the picture folder disk type to enter.
CUSTOMIZING TV SETTINGS Viewing MJPEG • After entering MEDIA, press buttons to select MJPEG and then select the disk type to enter. Then use / buttons to navigate in the video folder and then select the desired video and press OK EXWWRQ ZKHQ ¥ DSSHDUV RQ WKH to play the video, or press menu button to display the control top-left, press bar, then use to select Play to display the video. SOURCE AV/YPbPr • Press the menu button on the main unit or on the remote control to display the main menu.
CUSTOMIZING TV SETTINGS SETUP • Press the menu button on the main unit or on the remote control to display the main menu. Then use to select the setup and press OK button to enter. Use to select the desired option. SETTING • Press buttons to select SETTING menu and then press OK button to enter. buttons to select the following setting options and then press Press buttons to adjust each option’s setting. Select menu language : English, Français or Español.
CUSTOMIZING TV SETTINGS Select CC mode :CC On, CC Off or CC On Mute. Basic Selection: CC1, CC2, CC3, CC4, Analog CC Text1, Text2, Text3, Text4. Advanced Selection: Service1, Service2, Digital CC Service3, Service4, Service5, and Service6. Mode, Font Style, Font Size, Font Edge Option Style, Font Edge Color, FG Color, BG Color, FG Opacity, BG Opacity. Turn On or Off the Audio Only. Restore the TV to factory default settings.
CUSTOMIZING TV SETTINGS PICTURE buttons to select PICTURE menu and then press OK button to enter. • Press Press buttons to select the following picture options and then press buttons to adjust each option’s setting. Picture Mode Brightness Contrast Color Sharpness Hue Color Temp. Advanced Settings Cycle among picture mode: Energy Saving/User/Retail/ Movie. Increase or decrease the amount of white in the picture. (For User mode) Adjust the difference between light and dark levels in the pictures.
COSTOMIZING TV SETTINGS CHANNEL buttons to select CHANNEL menu and then press OK button to enter. • Press Press buttons to select the following channel options and then press buttons to adjust each option’s setting. Signal Type Auto Scan Favorite Channel List Show/Hide Channel Number Channel Label Select antenna between Air and Cable. Cable: Select your cable system from: Auto/STD/IRC/HRC. Auto Scan: Select the Auto Scan feature to scan your available cable channels.
CUSTOMIZING TV SETTINGS Sleep Timer Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min. LOCK • Press buttons to select LOCK menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. buttons to select the following lock options and then press • Press buttons to adjust each option’s setting. Note: the default password is “0000”.
COSTOMIZING TV SETTINGS NETWORK Network Settings Network Status Deactivate Netflix Deactivate VUDU 00000000000020075609 • Press buttons to select NETWORK menu and then press OK button to buttons to select the following network options and then press enter. Press buttons to adjust each option’s setting. Network Settings Network Status Deactivate Vudu Select two types of network: Wireless Network or Wired Network. Show the network status. Deactivate Vudu and clear the account information.
CUSTOMIZING TV SETTINGS • If there is a new version, it will be downloaded in the background. When you want to enter the app, a menu bar will pop up reminding you that upgrade software is downloading. Please try later... • After the download completed, it can upgrade automatically after users press the standby button. Note: This procedure is fully automatic, and remember not to cut off the power.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV. Parental Control DOORZV WKH XVHU WR GH¿QH ZKLFK SURJUDP UDWLQJ WKH\ FRQVLGHU DFF
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel 5HVSRQVH 7LPH * 7R * /DPS /LIH 7\S +RXUV +RUL]RQWDO 9LHZLQJ $QJOH $W &5! 9HUWLFDO 9LHZLQJ $QJOH $W &5! :DOO PRXQW /[: PP 49.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
