CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation What's Included Front View Rear View Installing the Stand Removing the Stand for Wall-Mounting Wall-Mounting Screws Remote Control 4 4 5 6 7 7 7 8 Connecting External Devices 9 Customizing TV Settings Initial Setup Source Streaming Muse My Media Viewing Photos Listening to Music Watching Videos TV Settings General Portable remote Picture Audio Network Channel Time Lock APP settings Support Network 10 10 11 12 13 13 14 14 15 1
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included O INF TV Set TV Stand 123-700-CL6071 123-701-CL6071 Support Stand 154-710-CL6071 154-711-CL6071 En -4 Remote Control with Batteries 845-058-03B04 Four Screws 104-114-4031 Eight Screws 100-010-4031 User Manual Quick Start Guide User Manual 002-BF8-SEIKI Quick Start Guide 002-LGE-SEIKI
PREPARATION Front View 1. POWER Switch the TV between On / Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the OSD (on screen display) menu. 4. CH / Press to select a channel. 5. VOL -/+ Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION HDMI 3 10 Rear View HDMI 2 HDMI 1 1. Power Cord Connect to AC power outlet. 2. Headphone Socket Connect to the Headphones. 3. USB Port Connect to a USB storage device to play compatible audio and photo files. 4. LAN Network connection port. 5. HDMI Inputs Connect to a High-Definition (HD) signal input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7. PC AUDIO Input Connect to a computer audio output. En -6 8.
PREPARATION Installing the Stand • 1. Lay the TV face-down on a flat, cushioned surface to avoid damages and scratches. • 2. Fix the stand support to the base stand using the 4 pcs provided screws. • 3. Fix the stand assembly to the TV using the 8 pcs provided screws. Removing the Stand for Wall-Mounting • 1.Lay the TV face down on a flat, cushioned surface to avoid damages and scratches. • 2.Untighten the 4 pcs screws holding the stand assembly and remove them. • 3.
PREPARATION Remote Control INFO 33 En -8 1. :Switch the TV between On and Standby mode. 2.MUTE:Mute and restore TV sound. 3.0~9:Select a program.(ATV/DTV mode) 4.—:Enter multiple program channel numbers such as 2-1. 5. :Return to the previous viewing channel. 6.APP:Press to select the desired APP. 7.MENU:Display the main menu. 8.SOURCE:Select among the different input signal sources:TV/AV/Component/HDMI1/ HDMI2/HDMI3/VGA/USB. :Allows you to navigate the on9.
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable OR Digital Audio System Satellite Receiver VCR Composite/Component Cable (not included) Optical Cable (not included) HDMI 3 Audio Cable (not included) RF Cable(not included) HDMI 2 HDMI 1 VGA Cable 3.
CUSTOMIZING TV SETTINGS Initial Setup LANGUAGE ENGLISH FRENCH SPANISH Welcome to the SEIKI TV Setup Wizard. Follow this guide to help setup your TV for scanning channels or accessing your external devices for Antenna, Set-top Box, Blu-ray, DVD, Games and other players. Use the UP and DOWN arrows on your remote control or TV keypad to select the language of screen menu and message. • Connect the power cord to the power socket after you have completed all the physical connections.
CUSTOMIZING TV SETTINGS Use the UP and DOWN arrows on your remote control or TV keypad to select the channel scan type. 5 FOUND 7 QUIT 8 RETURN TO SCAN CHANNELS PROGRAM CONNECT A GAME, BLU-RAY, DVD OR OTHER PLAYERS • If channels cannot be found, this frame will be displayed automatically.
CUSTOMIZING TV SETTINGS STREAMING STREAMING MY MEDIA TV SETTINGS NETWORK • Press MENU button on the main unit or on the remote to display the main interface. Then use the Arrow buttons to select STREAMING and press OK to enter. Use the Arrow buttons to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the desired APP directly.
CUSTOMIZING TV SETTINGS MUSE Press MENU button to display the main interface, then use the Arrow buttons to highlight STREAMING and press OK to confirm. Use the Arrow buttons to cycle among different options and select MUSE to enter, then to select the desired programs and shows to watch. MY MEDIA STREAMING MY MEDIA My Media Display photos, music & video from a USB drive. Press ‘OK’ on your Remote or change Source to USB.
CUSTOMIZING TV SETTINGS VIEWING PHOTOS • Use the Arrow buttons to highlight the PHOTOS option and press OK, then it will jump to confirm the inserted drive, press OK to enter. After entering PHOTOS, use the Arrow buttons to select the picture file and press OK to enter. • After entering the picture file, use the Arrow buttons to select the desired picture, to display. When the picture is playing, the picture Function Bar will be then press the displayed.
CUSTOMIZING TV SETTINGS WATCHING VIDEOS • Use the Arrow buttons to highlight the VIDEOS option and press OK, then it will jump to confirm the inserted drive, press OK to enter. After entering VIDEOS, use the Arrow buttons to select the video file and press OK to enter. A B • After entering the video file, use the Arrow buttons to select the desired music, then press to display. When the picture is playing, the music Function Bar will be displayed.
CUSTOMIZING TV SETTINGS GENERAL • Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to confirm. Use the Arrow buttons to cycle among different options and select General to enter and adjust each option setting. MENU LANGUAGE TRANSPARENCY ZOOM MODE VGA SETTINGS CLOSED CAPTION DLC PORTABLE REMOTE RESTORE DEFAULT En - 16 Select the menu language among English, Français or Español. The default on-screen menu language is English.
CUSTOMIZING TV SETTINGS PORTABLE REMOTE • Use the Arrow buttons to highlight Other Settings and press OK to confirm, then select Portable Remote to enter. You can pair your portable devices with the TV by using the following steps and operate TV by your device. PICTURE ENERGY SAVING N • Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to confirm.
CUSTOMIZING TV SETTINGS ADVANCED OPTION Set the following options: Noise Reduction: Reduce the noise level of the connected device: Off/Weak/ Middle/Strong. MEMC:Cycle among Motion Estimate and Motion Compensation modes: Strong/ Normal/Off/Low. AUDIO • Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to Use the Arrow buttons to cycle among different options and select Audio to enter and adjust each option setting.
CUSTOMIZING TV SETTINGS NETWORK • Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to confirm. Use the Arrow buttons to cycle among different options and select Network to enter and adjust each option setting. • The first time when connecting the network and make connection successfully, Network Updated menu will pop up, and confirm Next to enter Enable Interactive TV menu.
CUSTOMIZING TV SETTINGS TIME • Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings and press OK to Use the Arrow buttons to cycle among different options and select Time to enter and adjust each option setting. SLEEP TIMER 4:10 AM 01/01/2015 OSD TIMER TIME ZONE DAYLIGHT SAVING TIME CLOCK Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min.
CUSTOMIZING TV SETTINGS USA CANADA RRT SETTING RESET RRT CLEAR LOCK TV RATING: Press OK button to lock or unlock TV rating. Select MPAA rating : N/A,G, MPAA PG, PG-13, R, NC-17,or X. Select MPAA rating for Canada English-speaking Canada English : E, C, C8+, G, PG, 14+, 18+. Select MPAA rating for Canada Quebec Canada : E, G, 8 French ans+, 13 ans+, 16 ans+, 18 ans+. Set Rating Region Table. Select to reset the RRT setting. Clear all lock settings.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers users a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ.
SEIKI TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by SEIKI LLC(SEIKI or the Warrantor) to the original consumer purchaser against defects in material and workmanship (“Warranty”) as follows: 1. 2.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. • Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. • YouTube You can browse the following website for more help: https://productforums.google.
