User's Manual
10
En
-
CUSTOMIZING TV SETTINGS
Initial Setup
Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter
Standby Mode and the red LED indicator will illuminate.
In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn
blue.
buttons to select your desired mode and press OK to
Home Mode : The picture mode will be Standard if
you select this mode.
Retail Mode : Select Dynamic Mode if you would
like your picture to be brighter. At times this mode
may use more energy to operate the Volume/Sound
Mode and Picture Mode.
The SLEEP-MODE Power should be less than
0.5 W.
5
7
8
9
If channels can not be found, this
frame will be displayed automatically.