User's Manual

TROUBLESHOOTING

If your TV does not operate normally or cannot be turned on, please check

the following troubleshooting questions. Remember also to check any other

connected electronic device, such as DVD or blu-ray player to pinpoint the

problem. If the TV still fails to operate normally, please contact technical support

(RefertoWarratypage).

SYMPTOM POSSIBLE CAUSE REMEDY

Dead. No LED lit No power to the TV.

• Check all connections to the

TV's AC socket.

Dead. No LED lit red Set in standby mode.

• Press either the Power button

or the Standby button on the

remote control.

Blue screen

No signal.

• Press the SOURCE button to

select the correct source.

Incorrect

source selected.

Noisy, snowy, ghosting

picture(TV)

Poor antenna signal.

• If using an indoor antenna, try

adjusting the antenna position.

Check antenna connections.

No sound

Sound "Mute". • Turn sound "Mute" off.

Volume set too low. • Check volume settings.

External leads

not connected "if used".

• Check that all external leads

are connected properly.