Product Instruction

6. Live broadcast protocol: RTMP and RTSP
7. RTMP push address: set the address of the RTMP server, and the controller will
push the video stream in the camera to the set server
8. Flow key: the client shall fill in the corresponding information according to the
push flow address of his server
9. RTSP: after the live broadcast protocol is set to RTSP, three playback addresses
will be automatically obtained, which are fixed IP playback address of the camera,
IP playback address of the camera and wifi IP playback address of the
camera.According to the corresponding access address can be input in the player
stream address to watch the live streaming
10. Boot automatic operation: after starting this option, the device will restart when
power is cut off in the state of live streaming, and automatically continue to play
11. volume：video volume can be adjusted by the controller to 1-100
Exposure parameter setting
1 .EV value debugging: changing the brightness of the screen to -5-+5 through
handover of EV value
2 .ISO Settings: there are two types of Settings: below and locked. The ISO setting is
100 at the lowest and 6400 at the highest
3.Shutter speed: divided into under and lock Settings, the fastest 1/8000, the
slowest 1/30
White balance Settings: White balance Settings are divided into automatic,
incandescent, fluorescent, fluorescent, overcast and manual adjustment.Manually