User's Manual

(2). THROTTLE HOVERING SETTING

Throttle hovering setting is fine-tuning adjustments for the

throttle, affecting performance only around the center point

and only in the normal condition.This function can set knob

VA/VB/VC to control, turn right the rotor speed becomes

faster, turn left the rotor speed becomes slower.

Rotor speed changes caused by temperature, humidity,

altitude

or other changes in flying conditions are easily

accommodated.

Setting Method:

Use up/down button to select Throttle hovering setting,

OK button is to enter editing.

Steps:

1. Use direction buttons to select editing part.

2. Use +/- button to select “MODEL”.

Use +/- button to active or inhibit this function.

3. Use

+/- button to set “Rate”. Press OK button for seconds

can back default.

4. Use +/- button to set control switch.

5. Press EXIT after setting.

INSTRUCTION

HELICOPTER