User's Manual

Because of the different receiver modulation PPM/PCM,
the transmitter should be accordance with the receiver
modulation.
Setting Method
Use up or down button to select Modulation setting, OK button is to
enter editing.
PPM and PCM is selectable.
4.Modulation setting
Adjustable travel limit (ATL) makes the channel 3 TRIM LEVER
(THROTTLE TRIM) effective only at low throttle, disabling the trim
at high throttle. This prevents pushrod jamming due to idling trim
changes. This function defaults to ON. If you are not using channel
3 for throttle, youmay want trim operation the same as on all other
channels. To do so, set ATL to OFF.
Setting Method
Use up or down button to select Model selecting, OK button is to enter
editing.
Steps:
1. Use direction buttons to select the model.
2. Press OK button.
3. Press EXIT after setting.
3.ATL
26
WFT09
INSTRUCTION