User's Manual
RECEIVER
MODEL NO.: WFR09
TYPE: 9 CH PCM/PPM, Dual conversion
POWER SUPPLY: 1.2V x 4 (4.8V)
CURRENT DRAIN: 9.5mA
WEIGHT: 19 g
DIMENSION: 44.88mm x27.90mm x16.39mm
BAND: 35, 36, 40, 41, 72MHz
WFR09-P 8 Channels Dual Conversion Receiver (PPM)
72MHz, pull up the switch to A, the receiver is compatible with WFLY
and FUTABA series transmitters.
Pull down the switch to B, the receiver is compatible with JR series
transmiters.
35MHz and 40MHz are compatible with all kinds of transmitters.
1.AIL:Aileron (Channel 1)-----------------------
2.ELE:Elevator (Channel 2)--------------------
3.THR:Throttle (Channel 3)--------------------
4.RUD:Rudder (Channel 4)---------------------
5.GYR:Landing Gear/Gyro (Channel 5)-------
6.PIT:Flaperon/Pitch (Channel 6)---------------
7.AUX1:Auxiliary channel 1 (Channel 7)--------
8.AUX2:Auxiliary channel 2 (Channel 8)--------
9.Power:Input + 5V
(There are 9 rows needles, 3 needles in each row,
from the top needle to the bottom, the 3 needles are PCM/PPM pulse, +5V and Ground.)
4
The receiver is only used for WFT09 transmitter.
WFT09
INSTRUCTION
WFR09 9 Channels Dual Conversion Receiver (PCM)
1.AIL:Aileron (Channel 1)-----------------------
2.ELE:Elevator (Channel 2)--------------------
3.THR:Throttle (Channel 3)--------------------
4.RUD:Rudder (Channel 4)---------------------
5.GYR:Landing Gear/Gyro (Channel 5)-------
6.PIT:Flaperon/Pitch (Channel 6)---------------
7.AUX1:Auxiliary channel 1 (Channel 7)--------
8.AUX2:Auxiliary channel 2 (Channel 8)--------
9.Power:Input + 5V
(There are 9 rows needles, 3 needles in each row,
from the top needle to the bottom, the 3 needles are PCM/PPM pulse, +5V and Ground.)