User's Manual

6. Swash param setting
14
This function is to adjust the aileron, elevator and pitch travel range
of swash mixing mode.
Setting Method
Use up or down button to select Swash param setting, OK button is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set the travel. Press OK button for a while is to back default(60%).
3. Press EXIT after setting.
7. Auxiliary channels setting
This function is for channel 5 to channel 9 function setting.
Setting Method
Use up or down button to select Swash param setting, OK button is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set the switches or knobs. The switches can be set from A to F,
the knobs can be set as VA, VB, VC, VL, VR or none(-).
3. Use left or right direction button to set normal or reverse direction of every channel.
3. Press EXIT after setting.
WFT09
INSTRUCTION
Effection
direction
Value
Channel
Switch
Direction