User's Manual

SYSTEM SETTING

1. Monitor

Monitor shows the servos’ movement situation.

In PCM, this function is to describe the 9 channels output.

In PPM, this function is to describe the first 7 channels output.

Setting Method

Press menu button, enter system setting, the first function is the monitor.

WFT09

INSTRUCTION

2. Dual rate & Exponential setting

(1). AIL

(2). ELE

(3). RUD

Dual rate is to adjust aileron, elevator and rudder travel range. The range is between

0%-120%.

Exponential setting is to adjust aileron, elevator and rudder sensitivity when the sticks are

around the middle. The range is between -100% to +100%.

Setting Method

1. Select channel

Aileron, elevator and rudder are selectable. Press +/- buttons to select channel,

OK button to finish setting.

2. Set the switch and its position(0,1,2)

Press direction button to select “SWT”, edit it. +/- buttons can select function

switch(A-F).

After selecting the function switch, press right direction button to enter the

switch position setting, use +/- buttons to set.