User's Manual

4. Aileron-2

●Function

●Settings

Aileron -2 is aileron another channel 's distribution.

Press the MENU key to boot into the "System The step of settings is as follows

Settings" menu, use Up / Down keys to select the 1. Using the + / - keys to choose different models.

"aileron -2", press the OK key to

enter this function 2. Selected the options, press OK key to confirm.

interface, as above. 3. Set successfully, press EXIT key to return.

6 Code Match

●Function

●Settings

This remote control is the 2.4G spread spectrum, identification code information, before you use the

frequency hopping systems, with a high anti- remote control system pls matched with the 2.4G

interference. Each remote control has unique receiver including in the device.

Into the "Preference Settings" under "code" menu short distance. 2.4G module

system can not use this

. Click OK key to enter the state of the coding. As function in the closed state, please refer to

above “" Once the code successfully

The step of settings is as follows: will initiative to return the menu. Also Can press

1. First to

use the arrow keys to select on the "Exit"key to quit.

code, the process of the code needed within a

Coaching / Simulation

Warning :

When using this function, please ensure that no other operation of remote control!

5 Fail Safe

Selection Refer the instroduction on page 24

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Airplane Function

FCC WARNNING

Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment..