User's Manual

Voltage WFLY Logo
RF modulation
Time display
Trainer function
display
Elevator
trim display
Special mixing
Throttle trim
display
Time r
Rudder trim
display
Model parameters
display
Aileron trim
display
26
Airplane Function
Introduction
This section are mainly introduces the airplane Shown). Please choose the model, re-boot, the
functions. Please press the MENU key to boot, transmitter can display the functions of airplane.
you can enter the "System settings”item,use Up / Following description the details of each function.
Down keys to select" Model Settings ",
press the
OK key to enter the function interface, (as
Input mode and Functions
1.The main interface
When the power switch turned ON, the interface Voltage, Ti me, Models and Aileron, Throttle,
as shown. In this state, the user can view the Elevator, Rudder and other state
2.Function Menu refer the instructions on page 12Selection
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE
Airplane Function