User's Manual

25
3.Code Match
●Function
●Settings
This remote control are the 2.4G spread identification code information, before you use the
spectrum, frequency hopping systems, with a high remote control system pls matched with the 2.4G
anti-interference. Each remote control only has an receiver which including in this device.
Into the "Preferences" under "Advanced settings" the process of
the code needed within a short
menu. Press OK key to enter the “Code “interface distance. 2.4G module system in the closed state is
under the "Advanced Settings" . As above. not available, please refer to "modulation type."
Specific settings following these steps: Once the code successfully will initiative to return
to
1. First to use the arrow keys to select the” code”, the menu. also can press "exit” Key to Quit.
Warning
When using this feature, please ensure that no operation of other remote control!
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE