User's Manual

24
Introduction of Advanced Setting Menu
1. Speeder Mixing Settings
●Function
●Settings
Speeder mixing settings is under the case have state can set the output action servo.
the speeder, uses and settings the speeder . In the
Into the "Preferences" under the Advanced 2. In the "mixing" option to set the on/off of the
Settings "menu.use Up / Down keys to select the"
mixing functions, with + / - key to implement.
Speeder mixing settings ", press the OK key to 3. In the "ratio" option set the mixing value, with + / -
confirm enter the interface. The steps of settings key to implement. Long press OK key to restore the
is as
follows: default value.
1. First to use the arrow keys to enter the edit 4. Set successfully, press EXIT key to return.
mode.
2.Fail Safe
●Function
●Settings
Fail safe function is used for various reasons automatically return to the default values position or
(such as interference,long distance), the receiver maintain the current value of the function.
will lost the transmitter signal,and the receiver will
Press the MENU key to boot into the item .
"Preferences" menu, use Up
/ Down keys to 2. With a + / - key to maintain the settings / specific
choose "Fail safe" and press OK key to enter the position.
function interface, as above . Can not use this 3. Click OK key, can be deposited the current actual
feature when the 2.4
G module in close state. channel parameters.
The steps of settings is as follows: 4. Set successfully, press EXIT key to return.
1.First to use the arrow keys to select the edited
Warning :
When using this feature, please ensure that no operation of other remote control!
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE