User's Manual

22
12.Swash
Swash type selection
●Function
●Settings
If using a helicopter with CCPM, connecting a remote control device offers two modes: normal,
cross-shaped piece of servo will automatic going and 3CH120 (CCPM) mode. As above
the mixing action. Please use the helicopter
swash according to the type of choice. This
In the "Preferences" interface,use Up / Down keys
press OK key to enter.
to select the "Swash", press OK key to confirm 2. Selected swash type selection press OK key to
enter the “Swash type selection “interface, as enter, with + / - key to implement the selection mode.
above. 3.. Set successfully, press EXIT key to return.
The steps
of settings is as follows:
1. First to use the arrow keys to select the Swash,
Swash Parameter adjustment
●Function
●Settings
Swash parameter adjustment function is selected pitch three parts .
the swash type for adaptation the aileron elevator,
In the "Preferences" interface,use Up / Down keys to enter.
to select the "Swash", press OK key to confirm 2. Selected the swash parameter adjustion press
enter the “Swash type Adjustment“interface, as OK key
to enter, with Up/down key to implement the
above. selection.use +/ -- Key to adjust the parameters.
The steps of settings is as follows:1. First to use 3.. Set successfully, press EXIT key to return.
the arrow keys to select the Swash, press OK key
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE