User's Manual

20
●Settings
In the "Preferences" interface,use Up / Down keys choose individual settings on one or setting on both
to select the "throttle curve settings", press OK sides ), Press the + / - keys to set the values,long
key to confirm enter the function interface, as press the OK key to return
to the default value.
above. 3. Use left and right arrow keys to select curve
The steps of settings is as follows: points, + / - keys to change the value of curve points.
1. Flight status (normal or stunt). Use the arrow 4. Set successful, you can press EXIT key to
return.
keys to enter edit state, you use + / - keys to select
one of the curve, then enter the following settings.
2. Set the D / R, Use the arrow keys to select the
"D / R"in the screen, when the screen light off,
then enter the edit state of
this function(you can
8.Pitch Curve Settings
Curve picture
Flight Mode
Dual rate
Exponentia
Curve point
●Function
●Settings
Pitch curve with the throttle stick position can curve is based on hovering, as a certain engine rpm
adjusted the engine rpm flight in the best state, to adjust the pitch to the best place . Stunt pitch
This pitch curve can be set normal, stunt and lock curve is maintaining
a certain engine rpm, make the
curve and so on. The operation of those curve can pitch with the throttle to complete stunts in flying.
carried out by the switch.Pitch curve of normal
Pitch curve with the throttle stick position can curve is based on hovering, as a certain engine
rpm
adjusted the engine rpm flight in the best state, to adjust the pitch to the best place . Stunt pitch
This pitch curve can be set normal, stunt and lock curve is maintaining a certain engine rpm, make the
curve and so on. The operation of those curve can pitch
with the throttle to complete stunts in flying.
carried out by the switch.Pitch curve of normal
9.Throttle Cut Settings
●Function
Throttle cut settings function is to make the when implement the action. So when moving the
engine off when the flight finished. Switch K1 is for throttle trim,have to check the throttle closed action
opening and closing the throttle. Throttle trim position .
adjustment will affect the throttle closed position
Settings
and Notes: When the throttle closed the throttle turn off the function of the best range of
switch move to open, can adjust the value until the motion is to set near the engine speed .
carburetor valve fully closed (engine shutdown).
To prevent the error in the adjustment operation,
Warning:
●Settings
In the "Preferences" interface,use Up / Down keys a + / - key to implement.3.Under the throttle cut
to select the "throttle cut settings", press OK key condition, the rate of value and trim amount can
to confirm enter the function interface, as above. settings with + / - key to
the implement (adjustable
The steps of settings is as follows: range of ± 45%).4. Set successfully, press EXIT key
1, the first to use the arrow keys to select Edit to return.
Item2. Throttle cut settings function on or off with
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE