User's Manual

●Function
Throttle curve with the throttle stick position to with the pitch can achieve the best effect. Stunt
adjusted the engine flight in the best state. This Curve is maintaining a certain engine speed,make
throttle curve can set to normal and stunt curves the throttle with the pitch to complete the stunts
in
and so on.The operation of those curves can the flying .
carried out by the switch.The throttle curve of
normal curve is basic on hovering, the engine rpm
19
5.Sub Trim
●Function
●Settings
When the electronic trim can not make the servo ideal angle which user wanted. When set this
to achieve a satisfactory angle, be corrected by function , please place the trim in the central
the function, can make the servo to reached a location, then start setting
In the "Preferences" interface,use
Up / Down keys 2. Set the amount of the sub trim of movement with
to select the "Sub trim", press the OK key to the + / - keys or used the OK key to implement, long
confirm you access in this interface, as above. press the OK kay
can restore the default value.
The steps of settings is as follows: 3. Set successfully, press EXIT key to return.
1. First to use the arrow keys to select the edited
item.
6.Trim Settings
●Function
●Settings
Tr im settings function is adjustment for each trim be 1-250.
to change the trim sensitivity, settings amount can
In the "Preferences" interface, use Up / Down item.
keys to select the "Trim" and press OK key to 2. Set the amount of Trim with the + / - key,use OK
confirm access
in this function interface, as key to implement. If "reset", can set the trim location
above
The steps of settings is as follows: value to zero.
1. First to use the arrow keys to select the Edited 3. Set successfully, press EXIT key to return.
7.Throttle Curve Settings
Curve picture
Flight Mode
Dual rate
Exponentia
Curve point
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE