User's Manual

6.Restore factory settings

●Function

●Settings

Reset function is to present the model all the Comprehensive settings of re-work.

data back to the initial default settings, so can do Procedures.

Press the MENU key to boot into the "System 1. First to use the arrow keys to select the

Settings" menu, use Up / Down keys to

select Edited item.

"reset ", press Confirm key into the function 2. With + / - key to implementation the reset.

interface.As above: 3. Set successfully, press EXIT key to return.

The steps of settings is as follows:

7.Tone Settings

●Function

●Settings

Tone settings allows users to freely set all the Preference.

sounds on or off according to personal

Press the MENU key to boot into the "System The steps of settings is as follows:

Settings" menu, use Up / Down keys to select 1. Into the items, press OK key to

select the sound

"Sound", press the OK key to enter the function on or off.

interface, as above. 2. Automatically saved after confirmation.

8.Contrast Settings

●Function

●Settings

The contrast setting function can increase or decrease the contrast value to

adjust the brightness of the display , change the brightness of the screen.

Press the MENU key to boot into the 1. Using the + / - keys to set the value of

"System Settings" menu,use Up / Down

increase / decrease.

keys to select "Contrast settings" and 2.Long time press OK key restore the default

press OK key to enter the function value.

interface ,as above. 3. Set successfully, press EXIT key to return.

The steps of settings is as follows:

Helicopter Functions

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE