User's Manual

Instruction of the input function

MENU:

After booting, press the menu button to enter the function menu - Preferences. In addition, if

the in the function interface, press this key will be Back to the menu.

EXIT:

Press this key,

you can return to the previous menu level, or exit the edit state.

Add/Reduce Key:

Can be used to adjust values. Also set numerical value, press + / -, can accelerated settings the

functions.

Arrow Keys:

Arrow

keys are divided into upper and lower, left and right keys, can be used to switch the set up

Or edit the item.

Confirm key:OK key ( this machine confirm key have three kinds of function )

※. With the menu

to access the item.

※. To enter the edit mode.

※. Press this button long time, the selected item restore the default value

1.WFLY LOGO

2.2.4G RF circuit directed: shown 2.4G under work, closed wothout the logo.

3. Aircraft models: helicopter mode,

shows the helicopter LOGO, airplane mode, shows the airplane LOGO.

4. Accumulative used time: to display the cumulative duration of the using, can also be reset clear.

5. Battery voltage display.

6. Model data file shows: 1,2,3 ... and so on.

7. Mixing status shows: mixing state (throttle holding, throttle

cut, stunt mode) display MIX.

8. Helicopter swashplate shows: If you set a non-normal mode of swashplate, will show CCPM.

9. Trainer function display: Trainer mode will show "T",with flashing.

10. Timer display.

11. Digital electronic tuning: graphics + value dual display,and with tone reminder.

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE