User's Manual

12. ELEV-FLAP
ELEV-FLAP mixing is the first pre-programmed mix well cover.
This mix makes the flaps drop or rise whenever the elevator
stick is moved. It is most commonly used to make tighter pylon
turns or squarer corners in maneuvers. In most cases, the flaps
droop (are lowered) when up elevator is commanded.
WFT08S
INSTRUCTION
Setting Method:
Use up/down keys to select ELEV-FLAP, OK to enter editing.
Steps:
1. Use direction keys to select editing part, use+/- keys to
select on/disable.
2. Use direction keys to select editing part.
3.Use +/- keys to set value. Long press OK is back to default.
4. Use direction keys to select switch, use +/- keys to select
switch(A-F)and switch position(0,1,2,3).
5.Press EXIT after setting.
81
AIRPLANE