User's Manual

Table Of Contents

The receiver is used for WFT09S/WFT08S/WFT06X transmitter.

WFR09S 9 Channels Receiver

1．AIL：Aileron (Channel 1)-------------------------

2．ELE：Elevator (Channel 2)----------------------

3．THR：Throttle (Channel 3)------------------------

4．RUD：Rudder (Channel 4)------------------------

5．GYR：Landing Gear/Gyro (Channel 5)----------

6．PIT：Pitch (Channel 6)------------------------------

7．AUX1：Auxiliary channel 1 (Channel 7)----------

8．AUX2：Auxiliary channel 2 (Channel 8)-----------

9．Power：Input 4.8-6V--------------------------------------

(There are 9 rows needles, 3 needles in each row,

from the top needle to the bottom, the 3 needles are PCMS/PPM pulse, +5V and Ground.)

Indicator light

1. Usually, it’s Bit Error Rate indicator. The LED becomes brighter

when the rate increses.

2. The LED blinks once per second when the voltage is low.

3. The LED blinks once per 0.4 second when receiving data(Fail safe)

or when a massive Bit Error Rate occurs.

RECEIVER

MODEL NO.: WFR09S

TYPE: 9 CH PCMS/PPM

POWER SUPPLY: 4.8-6V

CURRENT DRAIN: 30mA

BAND: 2.4GHz

WFT08S

INSTRUCTION