User's Manual

5
Bluetooth address of the bracelet. After the APP is opened and runs in the background, it will
automatically search and connect successfully.
 Data synchronization: Manually pull down to get synchronization data on the APP homepage,
and the bracelet can store offline data of 7 days. The more data there is, the longer the
synchronization time may be. After the synchronization is completed, there will be a
corresponding prompt.
●
Cautions
 Avoid strong impact, extreme heat and heavy rain
 Do not disassemble, repair or modify the machine by yourself.
 Use 5V 500Mh charging, and avoid using overload power supply voltage
 The operating temperature is 0-45 °. Do not throw into the fire to avoid explosions.
 Do not charge with wet hands, otherwise, oxidation of the charging hardware terminal may
be caused, resulting in charging failure.
 Keep away from chemicals such as gasoline, cleaning solvents, propanol, alcohol or insect
repellent.
 Do not use this product in high-voltage and high-magnetic environments.
 If you have sensitive skin or wear too tight, you may feel uncomfortable.
 Do not wear bracelet to take a hot bath.
 Please promptly wipe the sweat droplets on the wrist, as when the watchband is exposed to
long time contact with soap sweat, allergens or contaminated ingredients, allergic itching
may be caused to the skin.
●FAQ
 What can be done when the Bluetooth doesn't work? (connection failure/slow connection)
Make sure that your device supports Bluetooth 4.0 in IOS8.0 and Android4.4 or above
1. Due to the problem of signal interference in wireless connection, the connection time may be
too long. If the connection cannot be preceded for a long time, please make sure to operate in the
environment without magnetic field or interference of multiple Bluetooth devices.
2. Turn off Bluetooth and turn it on again.
3. Restart the phone after turning off the applications.
4. Do not connect other Bluetooth devices or functions to your phone at the same time.
5. Check whether the APP is running normally in the background, otherwise, it may not be
connected.
● Unable to search for mobile phone
1. If the Bluetooth is not searched by the phone, make sure the phone is powered and activated and
not bound to other phones. Then close the bracelet to the phone. If it still doesn't work, please turn
off the phone Bluetooth, and restart the Bluetooth after 20S.
2. Make sure the phone GPS is turned on.
●Why wear a tight bracelet when measuring heart rate?
The bracelet adopts the principle of light reflection and collects the signal reflected to the sensor
after the light source penetrates the skin to calculate your heart rate. If you wear it loosely, there
will be ambient light entering the sensor, which will affect the measurement accuracy.
●
Whether the bracelet is waterproof