User Manual *PD-20-01* GT1 HUB Welcome to the Direct Drive Revolution.
*In order to use GT1 steering wheel of direct drive simulator more conveniently and quickly, please read this instruction manual carefully before installation and use, which contains important product and safety information; please ensure that Keep this manual for your future reference. *The product contains many advanced technologies, including custom overspeed motor, integrated electronics, wireless module, etc., and is compatible with PC.
Contents About Simagic........................................................................ 2 Before Use................................................................................ 4 Product Profile Product Introduction.............................................. 6 HUB Function Function Lever............................................................7 Lighting Settings.........................................................8 Knob Setting..........................................................
About SIMAGIC This section introduces Simagic brand and Simagic Tech.
Simagic Brand Simagic brand direct drive simulator is the first three-phase hybrid direct drive motor simulator designed independently in China. The steering wheel is directly connected with the motor shaft, eliminating the traditional belt and gear sensors, bringing a more pure and immersive direct driving experience.
Before Use This section describes the calibration settings that the hub needs to perform before use Simagic GT1 HUB User Manual ３
Calibration Settings Paddle A Paddle B knob 1 knob 2 1 Before calibration, flip the toggle switch C key up to C green (parameter setting calibration working mode) 2 Push down the V key toggle switch and hold it down (do not let go), at the same time, pull each and every paddle ABCD twice (in any order separately), afterwhich release the V toggle switch.
Product Profile This section describes the specific functions of hub so that you can quickly understand and use it Simagic GT1 HUB User Manual ５
Introduction * The main body is made of high-strength aviation aluminum alloy by high-precision CNC machining.
HUB Function Paddle A Paddle B knob 1 knob 2 Function Lever the C toggle switch is a three position lock switch, from top to bottom, green, red and blue; Represent different working modes of hub. 1 Toggle switch at C green (top): parameter setting calibration working mode.
Lighting Settings the self center toggle switch is divided into upper and lower position for adjustment. 1 Before adjusting the light, adjust the toggle switch of C key to C green (parameter setting calibration working mode) 2 Light adjustment: flip the V key toggle switch upward to V blue to cycle through 4 different light modes. Light mode: always on, fast flash, slow flash, light off 3 After completing the above operations, turn C green back to C Red (dual clutch mode) or C blue (dual axis mode).
Knob Setting 1 Before light adjustment and calibration, the Toggle switch C must be set to C green (parameter setting calibration working mode) 2 The mechanical damping can be adjusted by turning knob 1 (Left knob), with each notch change by 10%. ③ Knob 2 (right knob) can be rotated to adjust the force feedback size, with each notch change by 10%.
Technical Highlights This section introduces the latest technology advantages of GT1 HUB so that you can understand the unique features of GT1 more quickly Simagic GT1 HUB User Manual １０
New integrated design panel integrated featuring four LED buttons with switchable light modes, two CNC aluminum knob and three position toggle switch mode that enable quick adjustments. True Quick Release steering wheel without requiring any tools. Fast yet secure using automotive grade QR system. True Wireless transmission. It is the first in the industry to build multiple wireless modules for data transmission, eliminating the complex integration of multiple connecting lines.
Safety Suggestion This page introduces the safety suggestions for the steering wheel of the direct drive simulator in use, which is very important Simagic GT1 HUB User Manual １２
Proper Use * Equipment and power supply shall not be exposed to rain or other liquids or humid environment to avoid short circuit and leakage, which may cause damage and failure of equipment and fire. * The suitable operating temperature is 15 ℃ - 35 ℃. * It is suggested that the game time of power feedback is 1 hour, and overuse may lead to health risks; we suggest to take 5 minutes off every 20 minutes, and the maximum driving time per person per day is 2 hours.
Packaging Brief This section introduces the packaging content of GT1.
1.5m USB data cable. Delivered to users with package for hub upgrade or standby Warranty card. As an important evidence of after-sales service, please keep it properly Two kinds of Allen wrench. 1.
Quick Release This section introduces the unique design of simagic, Quick Release system; no need for any tools to connect the simulator host Simagic GT1 HUB User Manual １６
Operation Explanation Simagic custom quick release adopts the design of high precision upper six balls and lower four balls, and the access base needs to align the steel ball hole position. It can be disassembled without any tools. The quick release logo shell is the first lock. Hold the red part of the shell when removing it. Pull out the quick release to remove it.
Adapter Host This section introduces GT1 recommended adaptation simulator host, simagic brand direct drive simulator host, and Industry leading simulator Simagic GT1 HUB User Manual １８
Simagic “M10” * M10 is the The first epoch-making version of the simulator host, independently designed steering wheel and motor shaft directly connected, eliminating the traditional belt and gear sensors, bringing a more direct driving experience。 Simagic “α” * The real-time, accurate and extreme faithful reproduction of the driving road state, physical feedback of the action effect in the racing game, realize a new human-computer interaction experience.
Race Manager This section introduces the control software of simagic direct drive simulator.
Race Manager * Race manager is a simulator control program designed by simagic according to the mechanical effect of the direct drive simulator host and the source of game feedback. Users can set the parameters of the direct drive simulator in this program. The interface is simple and easy to operate, which simplifies complicated parameter settings and complicated parameter relations, and brings more direct product experience to users.
Firmware Update This section describes the upgrade steps of hub.
Gt1 HUB provides firmware upgrade service. You only need to follow the steps below: 1 The computer remains connected to the Internet. The steering wheel must be separated from the base and connected to the computer through USB cable from the interface to realize USB networking。 USB Ports ②Go to race manager folder and open the "Updatehub" program. ③Upgrade according to the procedure prompts. 1.Click the“Check Update” 2.
After-sales Information Simagic GT1 HUB User Manual ２４
In order to protect the legitimate rights and interests of consumers and the operation of simagic brand, simagic formulates franchise terms and consumer product warranty terms, so as to restrict the official partners such as franchise agents to provide simagic warranty terms integrated with consumer standards to protect the legitimate rights and interests of consumers.
Additional Explanation Simagic GT1 HUB User Manual ２６
* Before trial use, please install the equipment on the rigid platform safely, and fix the main wheel base on a suitable platform bracket or racing equipment with the adapter screw. It is forbidden to use other types of fixings. * Before each use, it is necessary to check the installation of the base and the strength after starting the machine. * This product has a large feedback force and contains small parts. Children are not allowed to use this device alone.
User Manual *PD-20-01* M10 Base Welcome to the Direct Drive Revolution！
* For more convenient and quick use of M10 base, please read thisBefore installation and use, please read the instruction manual carefully, which contains important product and safety information; please make sure to keep this manual for future reference. * The product contains many advanced technologies, including custom overspeed motors, integrated electronics, wireless modules, etc. and is PC compatible.
Contents About Simagic······················································ 2 Product Profile basic introduction······································4 Base introduction······································ 5 technical introduction································· 6 Safety Suggestion················································ 8 Packing Brief packing list·············································· 10 Screw bag··············································· 11 Product assembly Unpacking Instructi
About SIMAGIC This section introduces Simagic brand and Simagic Tech.
Simagic Brand Simagic brand direct drive simulator is the first three-phase hybrid direct drive motor simulator designed independently in China. The steering wheel is directly connected with the motor shaft, eliminating the traditional belt and gear sensors, bringing a more pure and immersive direct driving experience.
Product Profile This section describes the specific functions of hub so that you can quickly understand and use it Simagic M10 Base User Manual ３
Introduction * The main body of M10 mainframe is made of high-quality alloy aluminum through CNC processing. The surface of the main body is put through multiple processes such as sandblasting and oxidation to make a simple and elegant color effect and comfortable surface feel. * The carbon fiber trim is embedded in the front and rear of the main unit, which greatly enhances the product texture and makes the body richer in racing elements. * Bright and beautiful SIMAGIC lacquered silk-screen LOGO.
Base introduction M10 base is made of integrated design, and the body is clean and less port. Host vent: Used for heat dissipation during base operation, Do not block. USB-B port： Use the factory equipped USB-B data cable to connect to the PC. USB Can Bus port.Can be used to connect Simagic peripheral converter box or future Simagic accesories Reset hole： The M10 has a memory protection function.
Technical Highlights The three CPUs respectively implement motor control, game effect presentation, and USB real-time communication. Give the entire system real-time, fast and complete reproduction of every force feedback detail Newly designed three-phase hybrid stepping motor, smoother and more accurate; Maximum continuous torque reaches 10nm.
Safety Suggestion This page introduces the safety suggestions for the steering wheel of the direct drive simulator in use, which is very important Simagic M10 Base User Manual ７
Proper Use * Equipment and power supply shall not be exposed to rain or other liquids or humid environment to avoid short circuit and leakage, which may cause damage and failure of equipment and fire. * The suitable operating temperature is 15 ℃ - 35 ℃. * It is suggested that the game time of power feedback is 1 hour, and overuse may lead to health risks; we suggest to take 5 minutes off every 20 minutes, and the maximum driving time per person per day is 2 hours.
Packaging Brief This section introduces the packaging content of M10.
Package Contents Power supply Mounting screw pack Fixed bracket USB data cable Quick release Warranty Card Simagic M10 Base User Manual１０
Screw bag Custom slider nut: To be used in slots on the side of the base along with supplied bracket. The unique design of this allows easy adjustment of the whee base to be closer or farther away from driver. M6 × 16mm flat head screws To be used with bracket stand bottom hole connection. 16mm Allen wrench. M6 × 10mm flat head screws To be used with bracket stand side hole connection4mm wrench. 4 mm screw.
Product assembly This section introduces the installation instructions of the M10 base. The M10 direct drive base is relatively simple to install and the accessories are already provided.
Unpacking Instruction This product is a valuable item. Due to the product's special appearance and product weight, it contains parts that cannot be repaired by the user. The factory packaging is protected by high density foam to avoid damage to the product caused by transportation and other factors . Do not unplug the power cord to take out the host,Unplugging the power cord will cause the power cord and the carbon fiber cover on the back of the host to fall off and will be damaged.
Base installation 1 Attach the bracket stand (bottom) ③ Adjust the direction of the wheelbase accordingly ② Install the wheelbase (use slide nut) The second way bracket stand to install the Simagic M10 Base User Manual１４
Operation Explanation Simagic custom quick release adopts the design of high precision upper six balls and lower four balls, and the access base needs to align the steel ball hole position. It can be removed without any tools. The quick release logo shell is the first lock. Hold the red part of the shell when removing it. Pull out the quick release to remove it.
Adapter steering wheel This section introduces M10 compatible steering wheel, two simagic GT1, one gt4 steering wheel Simagic M10 Base User Manual１６
SIMAGIC steering wheel GT1 Round wheel D wheel GT4 * This section is not limited to simagic single host.
Race Manager This section introduces the control software of simagic direct drive simulator.
Race Manager * Race manager is a host control program independently designed by simagic according to the mechanical effect of the direct drive simulator host and the source of game feedback. The interface is simple and easy to operate, which simplifies cumbersome parameter settings and complicated parameter relationships, and brings more direct product experience to users. * SIMAGIC supports six types of game force, and game may not use all types.
Download and install Users obtain simagic control software "race manager" as follows： （ 1 ） Official website of simagic Technology: www.simagic.com users can go to the homepage of the official website to navigate the "service and support" section and download the simagic professional driver software installation package "race manager" according to the guidance. （2）Through Simagic's designated sales outlets and channels.
Interface introduction Mechanical setting interface, specific parameter adjustment page, where users can set and save parameters of different scenes Mechanical force：To enrich the handle of the game, which works while whether the game is played or not. TotalForce To adjust the output range of the Force engine. The positive or negative signs represent the direction of the Force. OverallFilter To adjust the smoothness of the output of force engine.
WHEEL CENTER CALIBRATION Rotate the wheel to center manually, and then press the button CENTER Two ways of changing the parameter in the setting: 1．Pull the slider to change the parameter 2．Input the parameter through keyboards, and then press “enter” to fuction Upload parameter s from base to RaceManager.normally RaceManager will upload parameters autoly when it is opened or base is connected. To save parameters to base interal memorizer and remember these parameters even poweroff.
The second page of RaceManager is Calibration. all peripherals from simagic will be linked to base by can bus.here show all 6 axises and 64 buttons.that will be enough for most of all games.
Motor setting interface, which can view the basic information and system status of race manager. Motor Speed: SIMAGIC have 5 scales of motor speed to set different feeling of motor.you can see it represent suspension hardness of car. Game Model: Reserved Language: To set language of Race Manager. SYSTEM STATE: To show the state of base. Errors will be show here. Normally errors can be clear by restart base.
Firmware Update This section describes the upgrade steps of hub.
Wheelbase upgrade. Please keep the computer connected. Not connected properly 1 Connection is normal Enter Race Manager to check the version status. Simagic products will always be the latest version when you get them. If new versions are released, please follow the official channels. ② Go to the Race Manager folder, Open the base upgrade program and prepare to upgrade ③ Follow the prompts 1.Click the“Check Update” 2.
After-sales Information Simagic M10 Base User Manual２７
In order to protect the legitimate rights and interests of consumers and the operation of simagic Brand, simagic formulates franchise terms and consumer product warranty terms, so as torestrict the official partners such as franchise agents to provide simagic warranty terms integrated with consumer standards to protect the legitimate rights and interests of consumers.
Additional Information Simagic M10 Base User Manual２９
* Before trial use, please install the equipment on the rigid platform safely, and fix the main wheel base on a suitable platform bracket or racing equipment with the adapter screw. It is forbidden to use other types of fixings. * Before each use, it is necessary to check the installation of the base and the strength after starting the machine. * This product has a large feedback force and contains small parts. Children are not allowed to use this device alone.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment.
