User's Manual

The control panel on the Soundbar:
Symbol
Operation
Hold
Press
Power On/
Standby
Toggle the Mode change: LINE IN 
Bluetooth

USB Drive

ARC

Optical
Pause/Play (USB/Bluetooth Mode)
Mute / No Mute
Volume up
Next USB Drive/Bluetooth Song
Volume
down
Next USB Drive/Bluetooth Song.
Remote control buttons
Switch the product on or to standby
Mute or restore volume
EQ
Equalizer: Eq0: Normal, Eq1: Rock, Eq2:Pop,
Eq3:Classic, Eq4: Jazz, Eq5: Country, q6: Country
Skip to previous USB/BT audio file
Pause or play USB/BT audio file
Skip to next USB/BT audio file
+
Volume up
-
Volume down
Repeat (USB drive audio)
MODE
Input audio mode *
*MODE (source) selection shown on the LED display and light.
Line In source when plugging in
Bluetooth source
 Flashes if the Soundbar is not paired.
 Lights up if the Soundbar is paired.
USB drive source when plugging in
HDMI-ARC source
Optical In source
Importance Notice for soundbar mounting on the wall:
1) Wall-mounted installation must be carried out by qualified personnel only.
Incorrect assembly can result in severe personal injury and property damage! (If you intend to
install this product yourself, you must check for installations such as electrical wiring and
plumbing, which may be hidden inside or behind the wall.)
2) It is the installer’s responsibility to verify and confirm that the wall will safely support the total
load of the unit and wall brackets.
3) Additional tools (not included) are required for the installation.
4) Do not overtighten screws.
5) Use an electronic stud finder to check the wall type before drilling and mounting
6) The proposed height on the wall is 1.0~1.5meters
7) The strain relief (<23mm) of HDMI cable is recommended for more space during mounting.
M