User's Manual

What’s in the Box
Connecting Your Sound Bar to Your TV or other sources:
Illustration of the Soundbar connectors for different connections:
EN
EN
HDMI-ARC
HDMI-ARC
OPTICAL
OPTICAL
LINE IN
LINE IN
DC IN
DC IN
1a. Is an HDMI input jack on your TV labeled “ARC”? 1b. Don’t have ARC or Optical
output available on your TV?
NOTE: All cables what you needed should be plugged in before Power Supplies connected.
2. Connect the Power Supplies to Sound Bar
then power Insert Power Supplies to an AC outlet.
3. Turn on your sound bar.
Placing the Soundbar on a flat and solid surface. Hold the Power button (M) on the sound bar or
Press RED key on the remote control to turn it on. Selecting Mode (input source) as the following
instruction to enjoy your powerful sound. When the Soundbar is switched to standby, the red dot is
turned on.
NOTE: 1. RESET: Hang up is solved by disconnecting and reconnected the power supplies.
2. It will be standby within 10 munities if no signal from Line In, BT, USB, ARC and Optical
inputs. It also will be standby if the low sound from Line In need to be heard within about
15cm distance.
Use HDMI cable (V1.4 above)
to connect the sound bar to
the TV ARC socket.
Use Optical cable to connect the
sound bar to the TV, DVD player
or set top box.
Connecting the sound bar
identified LINE IN to the TV
with the provided AUX cable.
A red LED will pulse on
the front of the sound
bar indicating boot up.
Sound bar
Remote Control Screws Power Supplies 3.5mm Aux Cable User Manual
YES
NO
HD MI
TV
AR C
OP TI CAL
HD MI
AU X
HE AD P HO NE
HDMI
TV
OPTI CA L
HD MI
AUX
HEAD PH ON E
HDMI
TV
ARC
OPTI CA L
HD MI
AUX
HEAD PH ON E