Instruction Manual

1. Camera can’t turn on (blue LED off)?
①Check the B+ and ACC wiring are correct, and make sure that
the car is in ignition state.
②Check the 8pin power cord connector between the dash cam
and the extension power cord.
2.The recorder has no video recording (Red LED no flashing),
or the video has frame skipping or freezing?
① The TF card not been detected. Eject and the re-insert the TF
card into the card slot. Then format the TF card via smartphone.
② Make sure to use C10 or above high-speed card.
3.There has no live-video on the APP of smartphone?
① The permission requirements when turn on the app for the first
time must be set as "agreed", otherwise the app cannot be used
normally, and it needs to be uninstalled and reinstalled to obtain
the permission again.
② Make sure to connect to the correct Wi-Fi, that name start with
"CAR-DVR****”, otherwise disconnect the WIFI and reconnect to
the recorder WIFI
③ Ensure that the smart phone does not automatically cut off the
WIFI connection to the recorder.
④ The dash camera is power on.
<<< Common troubleshooting >>>