Product Information

Report No.: TCT220323E033
Page 6 of 6
Hotline: [phone] Tel: [phone] Fax: [phone] http://www.tct-lab.com
4. Test Results and Measurement Data
According to§15.247(i) and§1.1307b(1), systems operating under the provisions of
this section shall be operated in a manner that ensures that the public is not exposed
to radio frequency energy level in excess of the commission’s guidance.
The 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤
50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation
distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, where
 f(GHz) is the RF channel transmit frequency in GHz
 Power and distance are rounded to the nearest mW and mm before calculation
 When the minimum test separation distance is < 5 mm, a distance of 5 mm
according is applied to determine SAR test exclusion.
 The result is rounded to one decimal place for comparison
 BDR+EDR:
Channel
Frequency
(GHz)
Max.
Power
(dBm)
Tune
up
Power
(dBm)
Max.
Tune
up
Power
(dBm)
Max.
Tune
up
Power
(mW)
Test
distance
(mm)
Result
exclusion
thresholds
for 1-g
SAR
CH 0
2.402
0.49
0±1
1
1.26
5
0.39
3.0
 BLE:
Channel
Frequency
(GHz)
Max.
Power
(dBm)
Tune
up
Power
(dBm)
Max.
Tune
up
Power
(dBm)
Max.
Tune
up
Power
(mW)
Test
distance
(mm)
Result
exclusion
thresholds
for 1-g
SAR
CH 0
2.402
-7.28
-8±1
-7
0.20
5
0.06
3.0
Result:
Base on the calculation value, No SAR measurement is required.
*****END OF REPORT*****