Product Information

Report No.: TCT220323E033
Page 4 of 6
Hotline: [phone] Tel: [phone] Fax: [phone] http://www.tct-lab.com
2. General Information
2.1. Test environment and mode
Item
Normal condition
Temperature
+25ºC
Voltage
DC 3.7V
Humidity
56%
Atmospheric
Pressure:
1008 mbar
Test Mode:
Engineering
mode:
Keep the EUT in continuous transmitting by select channel
2.2. Description of Support Units
The EUT has been tested as an independent unit together with other necessary
accessories or support units. The following support units or accessories were used to
form a representative test configuration during the tests.
Equipment
Model No.
Serial No.
FCC ID
Trade Name
Adapter
JD-050200
2012010907576735
/
JD
Note:
1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test.
2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended
use.
3. For conducted measurements (Output Power, 20dB Occupied Bandwidth, Carrier Frequencies Separation,
Hopping Channel Number, Dwell Time, Spurious Emissions), the antenna of EUT is connected to the test
equipment via temporary antenna connector, the antenna connector is soldered on the antenna port of EUT, and
the temporary antenna connector is listed in the Test Instruments.